Aardwolf
The Aardwolf Site Saw M 2000 is a very sturdy bench saw constructed for cutting building materials on construction sites and in work shops. It features a 3HP motor guided by twelve bearings rolling on two extruded aluminium bars, which ensure the accurate cutting of all types of natural and artificial stone.
One of the distinguishing features of the Aardwolf Site Saw M 2000 is its ca..
$6,475.00
Add to Wish ListWishlist
Add to CompareCompare
Faster, smarter, efficient, flexible and fully automatic, Aardwolf bar and pipe lifters are designed to safely lift steel bars and tubes. No hydraulic power supply and no slings or chains are required. The operator is able to use the Round Bar Lifter to grab, lift and move pipe without assistance.
The Round Bar Lifter is ideal for handling round materials such as steel bars, tu..
$430.00
Add to Wish ListWishlist
Add to CompareCompare
Includes two a-frame sections, cross member and all necessary hardware. Middle support bar connects each a-frame end piece.
Features
4 safety post pockets (posts sold seperately)
Rubber pads on face of vertical frame
Store slabs on both sides
Constructed of 100mm channel and 50mm angle iron
Wooden gluts in base channel
..
$785.00
Add to Wish ListWishlist
Add to CompareCompare
For storing and transporting finished work. Ideal for transporting and storing material within the factory or transporting material to building sites. Frames can be loaded onto truck by forklift or crane.
Often people like to have two a-frames for one base. They will have one frame on their truck and one in the factory on the base. When the truck comes back from one ..
$1,475.00
Add to Wish ListWishlist
Add to CompareCompare
The portable Mortar Mixer L-111 can mix all material from sand and cement through to self-leveling epoxies, achieving a homogeneous mix in 3 to 5 minutes. The Mortar Mixer L-111 is designed for easy transport by one person. It fits on elevators and passes through standard doors. The vertical shaft mixing action does not splash and with the hand operated door, it delivers as li..
$3,775.00
Add to Wish ListWishlist
Add to CompareCompare
Aardwolf Scissor Lifters are equipped with rubber contact pads, which ensure the safe handling of materials. By means of a gravity controlled locking latch, the clamp automatically grips and releases the load.
Application
Suitable for lifting marble and granite slabs, tomb stones, concrete barriers, curbs (kerbs) and median walls. WLL 750kg.
Features
Gri..
$600.00
Add to Wish ListWishlist
Add to CompareCompare
Ideal for moving kitchen tops and other heavy work pieces onto work site. Large pneumatic wheels make moving loads over rough terrain easy.
Features
Grips material automatically and securely
Clamping supports and base are rubber padded
2 rubber wheels: 275 x 60mm
Length of support plate: 500mm
Wheelbase: 420mm
..
$465.00
Add to Wish ListWishlist
Add to CompareCompare
The Work Shop Racks are ideal for distributors and shops that use a variety of slab sizes. As inventory is used, posts can be adjusted horizontally, thus eliminating unused portions of the rails, making space available for replacement slabs and bundles. Please review our rack selection and specifications to select the correct rack components.
Features
The rack h..
$1,115.00
Add to Wish ListWishlist
Add to CompareCompare
These aluminium backer plates are attached to the polishing tool and each of the pads has a snail lock adapter. The adapter simply fits into place and locks on with a twisting motion. To remove the pads simply untwist and remove, then replace with next grit.
Specifications
100mm Snail Lock 5/8"-11 or M14.
Aluminium with rubber damper.
Weight: 0.26kg
..
$26.00
Add to Wish ListWishlist
Add to CompareCompare
The Round Bar Lifter (RBL305) is designed for clamping and lifting steel pipes and steel tubes. It is fast, efficient, flexible and fully automatic, the RBL305 is ideal for work in the factory or on construction sites. It is equipped with an auto-locking latch mechanism and it needs no electric or hydraulic power supply. The RBL305 can be used with overhead crane or forklift b..
$1,000.00
Add to Wish ListWishlist
Add to CompareCompare
These aluminium backer plates are attached to the polishing tool and each of the pads has a snail lock adapter. The adapter simply fits into place and locks on with a twisting motion. To remove the pads simply untwist and remove, then replace with next grit.
Specifications
125mm Snail Lock 5/8"-11 or M14.
Aluminium with rubber damper.
Weight: 0.4kg
..
$32.00
Add to Wish ListWishlist
Add to CompareCompare
Useful in many applications for safe and secure attachment.
Features
Load rating stamped
Australian Standard material grade S/6
Tested to: AS 2741
Powder coat finish
Secure collar pin hole for security tie wire
Specifications
Working Load Limit (WLL): 1.5t
Weight: 0.2kg
..
$10.00
Add to Wish ListWishlist
Add to CompareCompare
Ideal for moving kitchen tops, stone, glass and other heavy work pieces onto work site. Large pneumatic wheels plus 140mm swivel caster at front that increases stability.
Features
Grips material automatically and securely
Clamping supports and base are rubber padded
2 rubber wheels: 400 x 85mm
Length of support plate: 500mm
Wheelba..
$650.00
Add to Wish ListWishlist
Add to CompareCompare
Specifications
Material: 100% high tenacity polyester
Colour: Green
Webbing Width: 60mm
Effective Length: 3m
Complemented with a protective sleeve
..
$39.00
Add to Wish ListWishlist
Add to CompareCompare
The Aardwolf Drop Bottom Bin is a heavy-duty unit manufactured from 3mm plate and reinforced to handle all types of solid waste products. It can be used by a forklift or overhead crane to transport site waste from one location to a dump point, emptying the contents into a larger bin or dump truck. Complete emptying is carried out by pulling the draw handle, allowing the floor to ope..
$4,520.00
Add to Wish ListWishlist
Add to CompareCompare
Hauling granite and marble isn't easy, and it certainly isn't safe if you don’t have the right equipment. A well made transporting frame is needed for both the safety of the driver and other workers, as well as for the protection of the granite and marble.
The sturdy Aardwolf Folding A-Frame for transporting stone has unique integrated vertical locking bars and ratchet locking stra..
$3,080.00
Add to Wish ListWishlist
Add to CompareCompare
The Aardwolf Miter Clamp is a jig used for fitting and gluing mitred panels with an angle of 90 degrees. It features a suction cup that firmly attaches the miter clamp to the top of the slab. The clamp allows the worker to make fine adjustments for tight and exact seams.
Features
Miter side-up slab with an angle of 90 degrees
No flipping, protecting material fr..
$470.00
Add to Wish ListWishlist
Add to CompareCompare
The Oval Hand Vacuum Cup is made of aluminium with an ergonomic handle including an integrated vacuum gauge and a pump. It is suitable for non-porous materials with smooth and curved surfaces such as glass, stone and steel pipes. The vacuum is created by pulling the hand pump repeatedly. The vacuum can be continuously monitored via the pressure gauge. Additional pumping ..
$270.00
Add to Wish ListWishlist
Add to CompareCompare
Aardwolf Scissor Lifters are equipped with rubber contact pads, which ensure the safe handling of materials. By means of a gravity controlled locking latch, the clamp automatically grips and releases the load.
Application
Suitable for lifting marble and granite slabs, tomb stones, concrete barriers, curbs (kerbs) and median walls. WLL 1000kg.
Features
Gr..
$810.00
Add to Wish ListWishlist
Add to CompareCompare
Versatile dual function fabrication table ideal when cutting, grinding or polishing an already cut to size piece. Serves as a work table in the horizontal position and as a slab dolly in the vertical position. The table top is adjustable for different sloping positions and height adjustable to suit the specific physical needs of the person in order to maintain optimum ergonomic posi..
$1,915.00
Add to Wish ListWishlist
Add to CompareCompare