Specials

Aardwolf

Display: List / Grid
Show:
Sort By:
Wolf Rack WRSS750-1200
The Wolf Rack has an A-frame structure manufactured from 2mm thick sheet metal.  The frames have an open structure.  The tops of the individual A-frames contain rivet nuts and are bolted into a U-shaped tie bar with self-aligning bolts, while load bars are fitted into slots at the base of the A-frames on each side.  The load bars are also fastened by self-aligning bolts screwed i..
$538.00
Fork Hook Attachment - Single Fork
The Fork Hook Attachment - Single Fork can be attached with hand screws and a chain.  Welded steel construction. Features   Attaches easily with hand screws and a 915mm safety chain with safety latch which attaches to forklift tines Swivel hook includes safety latch Durable powder coat finish   Specifications Capacity: 1,500kg P..
$130.00
Transport Frame - TF 2000
Ideal for transporting and storing material within the factory or transporting material to building sites.  Frame can be loaded onto truck by forklift or crane. Features Sturdy structure, designed so as to eliminate any risk of slab tipping over Slabs are placed on special rubber profiles and secured with 4 adjustable locking bars Contains extra storage section ..
$1,946.00
Trestle - 765N
The Aardwolf Trestle - 765N is portable but also can be dyno-bolted to floor for a permanent position.  It can also be used on job sites or for factory fabrication.  The rails are adjustable for width in 100mm increments.  The rubber covering the rails is UV ray, acid and mark resistant. Specifications Dimensions: L2000 x W600 x H765mm Weight: 36kg ..
$525.00
Vacuum Block Lifter 380kg
A powerful battery-operated vacuum lifting device for laying marble and granite slabs, concrete and similar.  Robust and compact, the Vacuum Block Lifter AVBL380 can be suspended on all types of lifting equipment by means of load hooks, chains, cables, etc. Features Equipped with a battery-operated vacuum pump Different suction pads are available for alternative uses ..
$2,715.00
AMVL600-2 Mechanical Vacuum Lifter
No power source required.  Ideal for the horizontal handling of nonporous sheet and plate material such as diamond sawn or polished granite, polished engineered stone, all types of metals, plastics and fibreglass.  An automatic self-cycling valve located in the bottom of the piston controls the vacuum grip and release cycle. Features Self-powered and self cycling ..
$7,365.00
Fork Hook Attachment - Double Fork
Converts forklift into a mobile crane in seconds.  All welded steel construction. Features   Attaches easily with hand screws and a 915mm long safety chain with safety latch which attaches to forklift Swivel hook includes safety latch Durable powder coat finish Specifications Capacity: 3,000kg Packaged Dimensions: L580 x W180 x H310mm ..
$260.00
Bar Clamp - 254mm
Bar Clamps have a unique purpose and function in the marble and granite workshops.  Designed for laminating edge strips, the Bar Clamps cut clamping time by 75% or more, increase production and improve quality of joints.  Bar Clamps are now an indispensable tool for the professional fabricator.  Fabricators who have used the Bar Clamps never want to go back to the days of C-clamp..
$87.00
Fiberglass Measuring Meter & Knife
Option for fiberglass cutting stand.   Simply attach to fiberglass cutting stand, using a hand screw.   Counter Display: 5 digits Measurement: metric unit Knift made from stainless steel ..
$188.00
DFF 1500 (Top Frame Only)
Ideal for transporting and storing material within the factory or transporting material to building sites.  Rubber topped on frame surfaces for maximum protection.  Fits inside standard pick-up truck.  Frames can be safely placed on your truck by forklift or crane. Specifications Capacity: 1,000kg Weight: 75kg ..
$1,417.00
Water Swivel
Water Swivels supply water and other coolants to your diamond core drill and to the material in zone of drilling.  Water swivel adapters fit just about any type of drilling equipment and are available with different threads and mountings. Consist of alumimium housing with stainless steel spindle, 2 precision ball bearings, and adjustable water flow. Specifications Weight:..
$164.00
Horizontal Stone Lifting Clamp AHLC-1050
For lifting and moving of concrete blocks and natural stone.  High friction replaceable rubber gripping pads protect load surfaces against damage.  Suitable for use on cranes or forklift booms.  Clamp jaws are gravity controlled.  They open automatically on every second lift and close on every second lift. Features Lifting capacity of 1500kg Grip range:..
$3,035.00
Aardwolf Slab Lifter 75
The patented Aardwolf Lifter is an accessory for lifting and moving slab-form loads.  The Aardwolf Lifters incorporate a spring-loaded latch that automatically releases the lifter from the slab once the slab has been fully lowered to the ground.  This makes the process of lifting and lowering of slabs a one-man operation. Application For lifting 30 to 75mm thick material ..
$1,280.00
Slab Post 50x50x5 - 1400 High
Slab post 50 x 50 x 1400mm with a 5mm wall thickness.  Steel yield strength of 345 MPa. Specifications Weight: 9.8kg Storage Capacity Example The maximum number of 20mm thick marble or granite slabs, with maximum size slabs 3200 x 1600 x 20mm, that can be safely stored per bay (using 2 post) at a maximum 4° lean is: 19 slabs Storage Capacity The maximum..
$69.00
Wolf Rack WRSS1000-1200
The Wolf Rack has an A-frame structure manufactured from 2mm thick sheet metal.  The frames have an open structure.  The tops of the individual A-frames contain rivet nuts and are bolted into a U-shaped tie bar with self-aligning bolts, while load bars are fitted into slots at the base of the A-frames on each side.  The load bars are also fastened by self-aligning bolts screwed i..
$597.00
Transport Frame - TF 2440
Ideal for transporting and storing material within the factory or transporting material to building sites.  Frame can be loaded onto truck by forklift or crane. Features Sturdy structure, designed so as to eliminate any risk of slab tipping over Slabs are placed on special rubber profiles and secured with 8 adjustable locking bars Eight locking bars per frame mo..
$2,096.00
Transport Frame - TF 3050
Ideal for transporting and storing material within the factory or transporting material to building sites.  Frame can be loaded onto truck by forklift or crane. Features Sturdy structure, designed so as to eliminate any risk of slab tipping over Slabs are placed on special rubber profiles and secured with 8 adjustable locking bars Ten locking bars per frame moun..
$2,254.00
AMVL600-4 Mechanical Vacuum Lifter
No power source required.  Ideal for the horizontal handling of nonporous sheet and plate material such as diamond sawn or polished granite, polished engineered stone, all types of metals, plastics and fibreglass.  An automatic self-cycling valve located in the bottom of the piston controls the vacuum grip and release cycle. Features Self-powered and self cycling ..
$8,930.00
Trestle - 855N
The Aardwolf Trestle - 855N is portable but also can be dyno-bolted to floor for a permanent position.  It can also be used on job sites or for factory fabrication.  The rails are adjustable for width in 100mm increments.  The rubber covering the rails is UV ray, acid and mark resistant. Specifications Dimensions: L2000 x W600 x H855mm Weight: 41kg ..
$540.00
Aardwolf Slab Lifter 75A
Aardwolf offers a new version of its patented Aardwolf Slab Lifters.  The new Aardwolf Slab Lifter Automatic 75A has an integrated auto-lock, unlock mechanism (patent pending), which allows the clamp to automatically grip slabs on pick-up and release the slabs on set down.  In many situations this makes moving and handling of slabs safer and more convenient. Application F..
$1,400.00